GD-150C機床采用頭尾架兩頂?shù)慕Y(jié)構方式，自動刃磨外徑2- 120mm，長度小于300mm的外圓、外錐面及倒角。1、機床采用新代伺服控制系統，并配置專用段差磨削程序，配置在線修整裝置。工件頭架采用日本NSK精密主軸軸承，砂輪發藍能同時裝2片砂輪，滿足一次裝夾完成粗、精磨的工藝需求。2、機床配置自動冷卻裝置和吸霧裝置、自動滅火裝置、冷卻系統異常保護程序、報警蜂鳴器，機床正面活動拉門、左右及后面有維修門，擺動式按鈕，工人專用啟停按鈕。 

GD-150C
砂輪架左右移動有效行程X軸 Left and Right Effective Travelling of Grinding Wheel Frame X-axis X-axis	350 mm
砂輪架前后移動有效行程Y軸 Feed and Back Effective Travelling of Grinding Wheel Frame Y-axis	180 mm
砂輪軸轉速（變頻調速）Rotation Speed of Grinding Wheel Frame (Frequency Conversion and Adjusted Speed)	1000～3000rpm
砂輪線速度 Linear Velocity of Grinding Wheel	18～54m/s
砂輪主軸功率 Spindle Power of Grinding Wheel	4KW
砂輪尺寸（金剛石砂輪）Grinding Wheel Size (Diamond Grinding Wheel)	350?127?20/65
工件頭架中心高 Centre Height of Workpiece Head Stock	105mm
工件頭架A軸轉速（變頻調速）A-axis Rotation Speed of Workpiece Head Stock (Frequency Conversion and Adjusted Speed)	0-500rpm
工件頭架錐孔 Bore-Hole of Workpiece Head Stock	Is050
工作臺水平面內凋整角度（配有千分表微調安裝附件）Adjusted Angle in Horizontal Plane of Work table (Has Dial Gage to install attachment)	10?/-10?每格讀數值為0.5?
工件頭架水平面內凋整角度 Adjusted Angle in Horizontal Plane of Work Head Stock	70?/-70?每格讀數值為1?
工件磨削直徑范圍 Grinding Diameter Range of Workpiece	Φ2—Φ120mm
工件磨削最大長度 Grinding Max. Length of Workpiece	300mrn
工件主軸徑向跳動 Workpiece Spindle Redial Runout	≤0.005mm
磨頭主軸徑向跳動 Grinding Head Spindle Redial Runout	≤0.005mm
X軸分辨率 X-axis Resolving Power	0.00lmm
Y軸分辨率 Y-axis Resolving Power	0.00lmm
機床外形尺寸 Machine Size	1800?1650?1750
機床重量 Machine Weight	2.5T